Skip to content

straddle stacker

The straddle stacker is an automatic palletizing machine that automatically moves pallets between two storage containers (stacks). It consists of two storage containers with their open ends aligned. The operator attaches the first stack to one end and the second stack to the other end of the container. When the operator pushes a pallet into one of the stacks, it automatically moves toward the other stack where it will be stacked automatically.
There are many different types of automatic straddle stackers in use today, but they all have four main components: A conveyor system, a spacer mechanism, a stacking mechanism and a locking device. This article will focus on two specific types of straddle stackers: Horizontal Straddle Stacker and Vertical Stradle Stacker.

Horizontal Straddle Stacker

The horizontal straddle stacker is an automated palletizing machine that automatically moves pallets between two storage containers (stacks). It consists of two storage containers with their open ends aligned. The operator attaches the first stack to one end and the second stack to the other end of the container. When the operator pushes a pallet into one of the stacks, it automatically moves toward the other stack where it will be stacked automatically.
There are many different types of automatic straddle stackers in use today, but they all have four main components: A conveyor system, a spacer mechanism, a stacking mechanism and a locking device. The horizontal straddle is comprised of these four components: A conveyor belt on which material is fed from a container; A spacer bar or switch bar that separates incoming material from outgoing material; A stacking component that holds incoming material in position while it is being placed on outgoing material; And a locking device to hold incoming and outgoing materials in place during stacking.

Vertical Straddle Stacker

The Vertical Straddle Stacker is a machine that automatically stacks pallets on top of each other. This type of straddle stacker uses a conveyor system, spacer mechanism and locking device to move the pallets from one container to another.

Functions of a straddle stacker

A straddle stacker is an automatic palletizing machine that automatically moves pallets between two storage containers (stacks). It consists of two storage containers with their open ends aligned. The operator attaches the first stack to one end and the second stack to the other end of the container. When the operator pushes a pallet into one of the stacks, it automatically moves toward the other stack where it will be stacked automatically.
There are many different types of automatic straddle stackers in use today, but they all have four main components: A conveyor system, a spacer mechanism, a stacking mechanism and a locking device. This article will focus on two specific types of straddle stackers: Horizontal Straddle Stacker and Vertical Stradle Stacker.
Horizontal Straddle Stacker
The horizontal straddle stacker is typically used in manufacturing plants because it has a large capacity for holding large quantities of materials and can operate efficiently in space-limited areas. Since this type of stacker operates horizontally, it can quickly move materials from one position to another without having to make any turns or jump over obstacles while being able to rotate 360 degrees in both directions at constant speed.
Vertical Straddle Stacker
The vertical straddle staker typically contains more moving parts than its horizontal counterpart, but it eliminates turning motions by providing 45° constant speed rotation at both sides of the machine. This type of staker is usually chosen for space-limited areas because it’

How does a straddle stacker work?

The straddle stacker is an automated palletizing machine that automatically moves pallets between two storage containers (stacks). It consists of two storage containers with their open ends aligned. The operator attaches the first stack to one end and the second stack to the other end of the container. When the operator pushes a pallet into one of the stacks, it automatically moves toward the other stack where it will be stacked automatically.
There are many different types of automatic straddle stackers in use today, but they all have four main components: A conveyor system, a spacer mechanism, a stacking mechanism and a locking device. This article will focus on two specific types of straddle stackers: Horizontal Straddle Stacker and Vertical Stradle Stacker.

Parts of a strobal stacker

A straddle stacker consists of many different parts, but the main components that make up a straddle stacker are a conveyor system, spacer mechanism, stacking mechanism and locking device.
The conveyor system is made up of two conveyors (conveyors), an upper and lower conveyor. The lower conveyor pushes the pallets onto the upper conveyor as it moves in between the two stacks of pallets.
The spacer mechanism is where the two chains come together with one chain positioned above and one below. When a pallet is brought into place between these two chains, it will automatically be pushed in to a stack by the lower chain.
The stacking mechanism consists of two vertical cylinders that can move inward or outward to push together or pull apart the pallets on either side of them. These cylinders allow for each stack to be stacked separately to ensure perfect alignment before stacking them together.
Finally, there is a locking device that locks the pallets in place once they have been properly placed on top of each other.

benefits of using a stradle stacker

The benefits of using a stradle stacker are numerous. For example, the straddle stackers mentioned in this article can be used for highly dangerous materials like chemicals and explosives. They also prevent damage to inventory from forklift pallet jacks. Additionally, these types of straddle stackers require less floor space than other methods of stacking pallets.

Disadvantages of using a Stradle Stacker

Possible accidents that can occur: the operator of a straddle stacker must be always vigilant and prepared for potential accidents. There are many instances where operators could get injured if an accident occurs. There is also the chance that an accident may injure or kill a bystander, depending on how close they stand to the machine.
Stride length: because of the need for two separate conveyor systems in order to stack two different stacks of pallets, there is a greater distance between steps when compared to traditional horizontal palletizers. This means that frequent backups and delays will occur, as well as a longer travel time for each step

Conclusion

A straddle stacker is a device that consists of two horizontal or two vertical tracks that are attached to each other in the middle. It is used to stack items in a specified order. It has a large number of uses in various industries including packaging and logistics. The main difference between a straddle stacker and a straddle pallet is that the straddle stacker only supports the weight of one item at a time while the straddle pallet is able to support a number of items.

FAQ’s

How does the straddle stacker work?

A straddle stacker automatically moves two containers together so that one end of each container is aligned with the other end. Then a pallet is placed in between the two containers and the two containers are moved together so that it is stacked on top of the pallet. The container that is aligned with the other one has a gap between them. The pallet will be pushed into this gap and will be stacked up against the other container.
A straddle stacker typically works in conjunction with a conveyor system since the pallets must move through a space between the two containers. When they are being filled, they must also be placed on top of one of the containers (with its open end aligned with the other one). The operator must then push the pallets into place manually.

How do the different types of straddle stackers compare?

Generally speaking, the two main types of automatic straddle stackers are belt and staggered belt. Belt stackers place pallets on a conveyor system and then move them to a second conveyor that stacks the pallets. Staggered belt stackers have pallets fed from one side of the unit, then move them to a second side of the unit where stacking takes place. Both units have high throughput and require little operator intervention.

Belt stackers are considerably quieter than staggered belt units because they do not contain moving parts like chain drives or flywheels. They are also more portable and cheaper to purchase and operate. Staggered belt stackers generally have higher capacities, but belts can be replaced if they require maintenance.

The primary benefit of belt stackers is their high speed and high output, which allows them to produce multiple stacks of pallets per minute (SPM). For example, a 2-20 pallet belt stacker can produce up to 2,020 individual boxes in under 8 minutes. In comparison, a staggered 20-60 pallet unit can produce only 678 pallets in the same amount of time. Staggered belt stackers are also more expensive than belt units.

What are the advantages of using an automatic straddle stacker?

The advantage of using an automatic straddle stacker is that it can lower the cost per pallet produced. It also produces uniform pallets, which help eliminate product damage and increase the shelf life of products. In addition, the unit is cost-effective, making it a good choice for small and medium-sized businesses that do not have a large number of employees.

Leave a Reply

Your email address will not be published. Required fields are marked *